Wednesday, July 15, 2015

How to Repair a Toro Self Propelled Lawn Mower



There are many brands that produce high quality self propelled lawn mowers. One of these is Toro. Although its mowers’ quality and craftsmanship are above reproach, Toro lawn mowers can get faulty. Even a mower from any other renowned brand can develop some technical hiccups and refuse to work properly. It could jam when it is time to climb a slope. The cable could wear out and cut without you noticing it. The machine’s engine could one day decide not to start at all, or it could start and shut down after a few minutes. A problematic lawn mower is something that most people would rather not keep. But it would be foolish to stop using your mower just because of a few technical faults. Simply have your Toro mower examined or do-it-yourself.

 

How to DIY your Toro self propelled lawn mower


A mower won’t self-propel

· As soon as you notice that there is a problem, park your lawn mower on a flat surface. Then shut it down and start troubleshooting.


· The first area to be suspected should be the drive cable. So the first thing to do is to spot the drive cable support bracket. This feature is on the handle, next to the deck.

· If you indeed sense there is a problem here, turn the cable support nut counterclockwise. Use a spanner/wrench to loosen the nut. As soon as the nut is loosened the cable will be loose as well.

· Now pull the cable down to the mower’s deck using your bare hand until it is taut. Then turn the cable support nut clockwise using your adjustable wrench. This will secure the cable back in the place where it was made to stay.

· Now turn on your Toro lawn mower again. Watch how it is driving itself. If the equipment cannot self-propel still, you should repeat these steps again.

Mower won’t go up a slope

The gas self propelled lawn mower will normally slow down, splutter or shut down all by itself when climbing a slope. The reason for this is the position of the gas tank in these models. When climbing a slope, the gas in the tank may slant backward or forward, interfering with the flow to the motor. These sudden cuts in gas supply may cause shortage in the motor and so the machine might shut down. The solution is always filling the tank with gas.

Cable is cut

When the cable is not loose it is broken or in dire need of replacement. The cable is usually attached to handle and runs all the way to the transmission. Because of where it is placed, the cable is exposed to a risk of breaking, stretching or wearing out. If you find any signs of wear and tear, simple get a replacement cable. They are sold online. When you get the cable, simply hook one side to the handle and the other end to the transmission. Then turn on your machine again.

What if the mower is running poorly or it isn’t working?

The first thing you must do is check if there is trapped grass clippings and trash in the transmission and motor sections. If you find that these parts are clogged up, remove the casing placed over the transmission. Clean up any grass clippings and dirt that you will find here. If you are using a gas self-propeller, there could be an issue with the oil filter or the spark plug. After you clean your spark plug, turn the equipment on. If it behaves the same way, go and replace the spark plug. Ensure that you install the new one perfectly. Do the same thing if the oil filter is dirty and damaged and needs immediate replacement.

Your Toro is loosing speed

The most common cause of this is the drive belt, which is in the motor casing. If this system becomes damaged or loose, the lawn mower could lose speed. Replace your drive belt if it shows signs of damage.

Conclusion


Repairing your Toro mower does not have to be difficult, as you have seen all through this article. You could do it very easily if you are determined and ready to seek useful information online best toro self propelled lawn mower